Principle of wire drawing machine In the production process, the continuous
production of copper core wire drawing equipment, the wire drawing speed will
gradually synchronize with the annealing, which will cause irregular changes in
the wire drawing speed, the traction belt speed is slow, and when the wire pitch
is not continuous . The factor that causes this is the unstable support of the
storage tray.
The working pressure in the production line application area may be higher,
which will cause the drawing machine pump time to be small, which also makes the
wire support force not constant, but because the winding speed is constant, this
makes the working pressure not Constant, it can cause inaccurate maneuvering
based on a single diameter error.
The main motor transmission was damaged due to long use. This can cause the
traction belt speed of the traction belt coil and the speed of the wire
rewinding machine to be mismatched, resulting in wire drawing. Solution:
Excellent lubrication of the battery to prevent sliding friction and
anti-filament when the wire is running at high speed; adjust the support force
of the wire so that the drawing time is always close to the annealing wheel;
ensure the detail of the annealed rim to avoid surface defects of the steel, so
that The amount of annealing current is unstable.
Ensure the integrity of the annealed rim to avoid surface defects in the
steel that would make the annealing current unstable.
Specific conditions based on the principle of the wire drawing machine:
Adjust the annealing wheel with the diameter of the adjustable V-belt pulley on
the rotating shaft. According to the drawing principle, the annealing wheel
speed ratio/electric winch speed = front slip index × fixed speed wheel
diameter/annealing wheel diameter, electric winch As everyone knows about wheel
diameter and annealing, the speed ratio of the fixed speed wheel and the
annealing wheel can be accurately measured, and the forward slip index can be
obtained. The mold shell can be configured again at the movement index of the
wire drawing machine to make the mold meet the requirements.
In conclusion, the wire drawing process is a delicate balance of precision and control, requiring a keen understanding of the principles that govern the machine's operation. At Yifa, we pride ourselves on our commitment to excellence and innovation. Our wire drawing machines are designed with the latest technology and engineered to provide the utmost reliability and efficiency in your production line. With Yifa by your side, you can trust that your manufacturing process will be supported by the best in the industry. Experience the difference with Yifa – where precision meets performance, and quality is never compromised.
www.yifam.com
Yifa